*Special Restrictions on Glass Breakage and Seal Failure Warranty
**Films specifically designed for use on exterior glass surfaces (outside applications).

Most applications of SUN-GARD films are automatically covered for glass breakage in accordance with the above schedule. However, certain darker films and certain types of glass do not qualify for coverage unless written approval has been obtained in advance of installation from the manufacturer, seal failure coverage is limited to the duration of the window manufacturer’s seal failure coverage. Restricted film and glass combinations that require pre-approval are listed on the SUN-GARD Film-to-Glass Compatibility sheet.

Other Restricted Applications (Prior Approval Required):
Double-pane windows larger than 40 square feet
Single-pane windows larger than 100 square feet
Glass thicknesses over 1/4 inch
Architectural shading from exterior overhangs, extensions, columns, etc.
Reflective glass
Rigid window framing systems of concrete, solid aluminum, or solid steel
Windows where the glazing compound or sealant has hardened
Buildings with previous glass breakage history
Architecturally odd-shaped windows
Windows with a damaged frame
Laminated glass in single-pane or double-pane windows
Any job over 5000 square feet
Skylights
Automotive film applied to flatglass

No Job Approval Application Will be Accepted for These Applications:
Triple-pane glass or double-pane glass with suspended films
Partial application of film to glass
Application of 2 or more films with different VLTs to the same piece of glass
Glass that is visibly chipped, cracked, or otherwise damaged
Wired, textured or patterned glass